Pneumatic swing clamp cylinders |
|
||
Pneumatic swing clamp cylinders are used for various types of clamping. Thanks to the design, it is easy to fit the clamping material because the clamping arm rotates over the material during clamping and then clamps. The angle of rotation is 90° as standard. With the double-sided arm, it is possible to clamp the material on two opposite sides at the same time. The clamps have a magnetic piston for contactless position sensing and do not have cushioning at the end positions. The single-sided clamping arm can be turned to any position, the double-sided arm has a fixed position.
|
Order codes |
Technical data | Dimensions | Data sheet (PDF) |
Technical information |
Technickal data
Working pressure | 0,6 MPa |
Min. pressure | 0,1 MPa |
Max. pressure | 1,0 MPa |
Temperature range | -5oC to +60oC |
Working medium | modified compressed air |
Piston diameter | 32 | 40 | 50 | 63 |
Thrust at 0,6 MPa [N] | 482 | 754 | 1178 | 1870 |
Return (clamp) force at 0,6 MPa [N] | 360 | 630 | 980 | 1680 |
Total stroke [mm] | 26 | 26 | 30 | 30 |
Clamp stroke (linear movement only) [mm] | 13 | 13 | 13 | 13 |
Stroke during swing [mm] | 13 | 13 | 17 | 17 |
Non-rotating accuracy [°] | ± 2 | ± 1,3 | ± 1,2 | ± 1,2 |
Available speed range [mm.s-1] | 50 to 200 | |||
Port size | G1/8" | G1/8" | G1/8" | G1/8" |
Weight - without arm [kg] | 0,45 | 0,61 | 0,95 | 1,24 |
Weight - with single-sided arm [kg] | 0,65 | 0,83 | 1,33 | 1,66 |
Weight - with double-sided arm [kg] | 0,85 | 1,00 | 1,67 | 1,95 |
Construction / materials
- body, end cap: dural, anodized
- piston rod: CK45
- arm: steel, zinc plated
Loosening, fixing, rotating or replacing the clamping arm
When loosening or fastening the arm, it is necessary to secure it in the desired position. Never tighten the locking screw without securing the clamping arm. Torque transferred to the piston rod could damage internal parts. | ||
After unscrewing the fixing screw, tap your arm in the direction of the axis of the clamp. Do not release it by tapping it from the side, it could damage the internal parts. | ||
CautionDo not allow lateral forces to act on the clamping arm. It could cause irreversible damage to the internal parts. The clamp is designed for clamping forces in the direction of the clamp axis (in the direction of the clamping stroke). |
CautionIn order to avoid shocks in end positions (and thereby reduce the service life or damage internal parts), it is necessary to use flow control valves for both directions of movement. |