Nacházíte se zde: Úvodní stránka > Cylinders > Clamp cylinders and grippers > Flat pneumatic power clamps

Pneumatic flat power clamps

Pneumatic flat power clamps are especially suitable for clamping elements during welding, in the automotive industry or where it is necessary that the clamp does not take up a lot of space. Flat clamps have a higher torque than standard power clamps with the same mounting dimensions. Advantage of the clamp is that the parts moving rectilinearly are covered and are thereby protected from flying irons and dust. After clamping, the clamp is mechanically secured and there is no risk of loosening in the event of a compressed air failure. The clamps have an integrated sensor for both end positions.

Technical information

Order codes

18301 10 00 032 0105

Arm position
10	90°
20	180°
00	without arm


Piston diameter
032	32 mm

Arm opening angle
0000	adjustable from 5 to 135°

Caution

The clamp must be correctly adjusted in its working (clamped) position. The adjustment procedure is described on the technical data section.

During installation, flow control valves must be used on both air inlets; otherwise, the clamp may be damaged.

Proximity switches

The position sensor is integrated into the clamp.

Arm position

The arm position can be changed at any time.

3D CAD model, inquiry, order

1830100000320000 1830110000320000 1830120000320000