Electro-pneumatic regulator
series MAER200 and MAER300
|
|
|
||
The electro-pneumatic regulator is used for continuous electronic
regulation of the output pressure based on the voltage or current input
signal. The outlet pressure can therefore be dynamically adapted to the
requirements of the application. The valve is also equipped with an output
that can be further processed. High accuracy is achieved thanks to the
integrated processor and PID control. The maximum flow at an inlet
pressure of 1 MPa and an outlet pressure of 0.6 MPa
is up to 1500 Nl/min. for series MAER200 and up to 4000 Nl/min. for series MAER300.
|
|
|
Technical data
Type | MAER200, MAER300 | |||
Pressure range (see order code) | 1K | 5K | 9K | |
Port size | in/out: G1/4“, G3/8“, relief: G1/4“, control exhaust: M5 MAER300: in/out: G1/4“, G3/8“, G1/2“, relief: G1/2“, control exhaust: M5 |
|||
Medium modified | compressed air | |||
Test pressure [MPa] | 0,3 | 1,5 | 1,5 | |
Temperature range [°C] | -5 to +50 | |||
Min. supply pressure [MPa] | set pressure + 0,1 | |||
Max. supply pressure [MPa] | 0,2 | 0,7 | 1,0 | |
Setting pressure range [MPa] | 0,005 to 0,1 | 0,005 to 0,5 | 0,009 to 0,9 | |
Supply voltage [V] | 24V DC ±10% | |||
Power consumption [mА] | 80 or less | |||
Input signal | current type [mA] | DC, 4 to 20, impedance ≤ 400 kΩ | ||
voltage type [V] | DC, 0 to 5, or 0 to 10, impedance approx. ≤ 50 kΩ | |||
preset input | 4 points (one point should be set to zero due to safety reasons, combinations of 2 input signals), impedance approx. ≤ 1000 kΩ | |||
Output signal | analog | DC output current 4 to 20 mA (load impedance 7500Ω or less), DC output voltage 1 to 5 V (load impedance 1 kΩ or less) |
||
switch | PNP or NPN output, max. voltage 24V DC, max. current 160 mA | |||
Linearity | within ±1% F.S. | |||
Hysteresis | within 0,5% F.S. | |||
Repeatability | within ±0,5% F.S. | |||
Sensitivity | within 0,2% F.S. | |||
Temperature characteristics | within ±0,2% F.S. | |||
Output pressure display | precision: ±2% F.S., ±1 digit, min. unit: 0,001 (MPa), 0,01 (bar, kg/cm2), 0,1 (psi), 1 (kPa) | |||
Enclosure | equivalent to IP65 | |||
Weight [kg] | MAER200: valve: 0,36, MAER300: valve: 0,69, common: bracket: 0,086 (L type), 0,08 (flat type), connector with cable: 0,055 (1m), 0,13 (3m) |
MAER200
Flow rate |
Relief flow rate |
|
Linearity - 1K |
Repeatability - 1K |
Pressure characteristics - 1K |
Linearity - 5K |
Repeatability - 5K |
Pressure characteristics - 5K |
Linearity - 9K |
Repeatability - 9K |
Pressure characteristics - 9K |
MAER300
Flow rate - 1K |
Relief flow rate - 1K |
|
Flow rate - 5K |
Relief flow rate - 5K |
|
Flow rate - 9K |
Relief flow rate - 9K |
|
Linearity - 1K |
Repeatability - 1K |
Pressure characteristics - 1K |
Linearity - 5K |
Repeatability - 5K |
Pressure characteristics - 5K |
Linearity - 9K |
Repeatability - 9K |
Pressure characteristics - 9K |