Solenoid actuated valvesseries K ISO 5599/1 |
|
Our new soleniod actuated valve series K ISO 5599/1 is based on the classic ISO series, but has higher flow rate and is also highly economical, compared to the discontinued ISO 5599/1 Compact series. Air pilot is used for valve actuating, so it is an indirectly actuated valve. The valves are mounted on base plates standardized according to ISO. The coils and pilot valves are common with the K series. Coil can be rotated to best suit the application. Valves can be used on the base plate individually or mounted as a group assembly. Valves of the K ISO 5599/1 series contains spool and sleeve assembly, which guarantee long lifetime of valve. |
We make the spool and sleeve assembly from hardened stainless steel. The technical interest is that thanks to the precise grinding and honing of both parts, such accuracy is achieved that the spool in the sleeve moves on the air cushion. This essentially eliminates possible wear and at the same time can be moved very easily and very quickly with the piston. The clearance is so small that there are no leaks even without a seal. |
Order codes | Technical data | Dimensions | Connectors | Spare coils | Data sheet (PDF) | Technical information |
Bases and manifolds | Connection dimensions |
Order codes
25 528090 52 30 6 000 |
|||||||||||||||||||||||||||||||||||||||||||||||
![]() |
|||||||||||||||||||||||||||||||||||||||||||||||
|
![]() |
Supply contain connector(s). |
![]() |
When using an external air pilot supply, the valve can distribute media with pressures from vacuum to 2,1 MPa. In this case, the auxiliary control pressure must be in the range of 0,15 to 1,0 MPa and the valve has a different ordering code. If this solution is required, please contact our technical department. |
3D cad model, inquiry, order