We present a third group of news in our line of pneumatic components, which was added into the electronic catalogue, this time oriented to air preparation units.
|
The new FRL unit series with robust metal construction with polycarbonate bowls with plastic guards. High flow rate and 5 μm filter element predestine these units for all smaller applications. |
|
|
FRL series which supplement series MACP401. Also this series features by robust metal construction with polycarbonate bowls with metal guards. These reasonable units with 40 μm filter element will find usage in wide range of applications, where the high flow is necessary. |
|
|
Primary air particulate filters are designed to separate liquid, water, rust, pipe scale, and debris from air lines. They should be installed upstream of the regulator and/or lubricator to prevent contamination from reaching other components. |
|
|
The coalescing filter is utilized when either clean air is required or longer component life is desired. This type of filter removes water and oil aerosols. It works differently than the particulate filter; dirty air enters the element from the centre and passes through a field of glass fibres which cause the aerosols to form into droplets which are heavier than the surrounding air. The droplets grow larger as they pass through the element and gravity causes the oil drops to drain to the sump of the bowl. By removing the harmful oil varnishes and contaminant that attack seals and gaskets, the valve or cylinder is much less likely to stick. To maximize the life of a coalescing filter it should always be used after a 5 micron particulate filter. |
|
|
Pressure regulators are used for reduce of pressure to working pressure, which is automatically hold on selected value. By using of optimal pressure, the longer lifetime of pneumatic components can be reach as well as save resources necessary for production of compressed air. |
|
|
Filters with regulator series MAFR
The integral part of the particulate filter/regulator (‘piggyback’) is a two station component designed to filter and regulate compressed air when cost and space are of primary concern. |
|
|
Usually mounted third in the FRL Series, the lubricator is designed to inject oil aerosols into the airstream of a pneumatic circuit. |
|
|
Accessories for air preparation units
Pro nové prvky na úpravu vzduchu je k dispozici toto příslušenství a náhradní díly:
|
|
|
Digital pressure switch series MP25
It is very reasonable digital pressure switch, which has 2 PNP outputs and one analog output. Thanks to large possibility of setting, it is fated to wide using in all applications where the information about pressure is necessary. |
|
| Air preparation units series FlexiBlok and HF50 will not be at producer's offer anymore, that is why it was deleted from our catalogue and we offer replacement - air preparation units series MACP and MA* (see above). Also pressure switch series PS27 and digital pressure switch DPS aren't in current produces's offer. | |
