We present a first group of news in our line of pneumatic components, which was added into the electronic catalogue.
| Double acting pneumatic cylinders DIN ISO 6432 with pressed-in tube |
 |
| Cylinders with thin-walled stainless steel 1.301 tube. These cylinders can't be disassembled and they can be used when these small cylinders must be used as all-stainless steel design. | |
| Double acting pneumatic cylinders anti-corrosive - hygienic clean |
 |
| Anti-corrosive cylinders are designed for use in area, where the hygienic clean is required (food processing or packing industry) or in aggressive chemical environment. Used materials are AISI 316 and 1.4301. Anti-corrosive cylinders are produced in several versions, for example: with thread on the front cap and with mounting holes on end cap, or with integrated swivel eye on end cap, and more. |
|
| Accessories for anti-corrosive - hygienic clean cylinders |
|
We also offer wide range of mounting accessories for anti-corrosive - hygienic clean cylinders, of course made from stainless steel:
|
|
| Rodless cylinders |
 |
| The order codes was changed for this popular series. Also VL1 series with integrated ball bearing for high loads was added. We pecified dimensions and technical data. We appended and pecified mounting accessories for these cylinders. |
|
| Pneumatic shake device - air cannon |
 |
| Air cannon extended our offer of pneumatic shake devices. This component is determined for release of blocked material in bunkers, hoppers, silos etc. |
|
| Mounting accessories |
|
| The valve bracket for cylinders was also added into the standard accessories. Valve bracket should be fixed on front or rear cap of cylinder. Bracket is universal, it means, that any valve can be attached on it - it is necessary to drill fixing holes in bracket according to the holes in valve. This simple but practical bracket should solve not only the problem with placing of valve in application, but it helps to better look and compact impression of application (it is not necessary to lead and fix tubes for inlet and outlet of cylinder). |
 |
| The couple of swivel flanges, which are used as mating part for swivel flange with spherical bearing are new too. Narrow swivel flange can be used also as fixed on cylinder, rectangular swivel flange is designed for use on frame. We also pecified shape of piston rod eye. |
  |
| Proportional position sensor series MPS with analog output |
 |
| Proportional position sensor with analog output (current as well as voltage) is suitable for application, where it is necessary to know exact position of the piston. It is comoact sensor, which can be fixed into the T slot. It is fully electronic sensor, which brings excellent properties, long lifetime and integrated protections. There is several types with various measuring range available for various cylinder strokes. If the cylinder stroke is smaller than measuring range, the starting and end position can be adjusted by user on the sensor. | |
| Rules for using of proximity switches |
|
| We prepared a few of rules for using of proximity switches to increase the lucidity. These are good ideas to improve lifetime and reliability of your proximity switches. These informations are available from local menu in each proximity switch type where it is relevant, for example here for proximity switches series KT-21 ans KT-50. |