Pneumatic swing clamp cylindersseries MCKC |
|
|||
Pneumatic swing clamp cylinders are used for various types of clamping. Thanks to the design, it is easy to fit the clamping material because the clamping arm rotates over the material during clamping and then clamps. For the MCKC series, the angle of rotation is fixed - 90°. The clamps have a magnetic piston for non-contact position sensing.
|
Order codes | Technical data | Dimensions | Data sheet (PDF) | Technical information |
Dimensions
Piston diameter 12 and 16 mm
Ø | A | B | D | E | F | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | WA | X | Y | Z |
12 | 15,5 | 25 | 6 | M5 | 11 | 3,5 | 6,5 | 4 | M4 | 7 | 9,5 | 8 | 29 | 20 | 54 | 35,5 | 15 | 5 | 8 | 12,5 | M3 hl.5,5 | OK 5x2,5 | 2 | 7-18 | 4 |
16 | 20 | 29 | 8 | M5 | 14 | 3,5 | 6,5 | 4 | M4 | 7 | 9,5 | 11 | 36 | 25 | 57 | 35,5 | 15 | 5 | 11 | 12,5 | M5 hl.6,5 | OK 7x2,5 | 2 | 7-20 | 5 |
Piston diameter 20 to 50 mm
Ø | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V |
20 | 25,5 | 36 | 36 | 12 | M5 | 18 | 17,9 | 5,4 | 9 | 7 | M6 | 10 | 6,5 | 14 | 51 | 35 | 84 | 62 | 28 | 8,7 | 16 | 10,5 |
25 | 28 | 40 | 39,6 | 12 | M5 | 23 | 22,5 | 5,4 | 9 | 7 | M6 | 10 | 6,5 | 14 | 51 | 36 | 85 | 63 | 29 | 8,5 | 16 | 10,5 |
32 | 34 | 45 | - | 16 | G1/8" | 30 | 29,5 | 5,5 | 9 | 7 | M6 | 10 | 15,5 | 18 | 67 | 45 | 107 | 71,5 | 28 | 11 | 20 | 22 |
40 | 40 | 52 | - | 16 | G1/8" | 30 | 29,5 | 5,5 | 9 | 7 | M6 | 10 | 23 | 18 | 67 | 45 | 108 | 65 | 27 | 8 | 20 | 29,5 |
50 | 50 | 64 | - | 20 | G1/4" | 37 | 36,5 | 6,6 | 11 | 8 | M8 | 14 | 28 | 22 | 88 | 65 | 129,5 | 76,5 | 34 | 11,5 | 22 | 35,5 |
Ø | VA | VB | W | WA | X | Y | Z |
20 | - | - | M8 | OK 10x3 | 3 | 12-25 | 7 |
25 | - | - | M8 | OK 10x3 | 3 | 12-25 | 7 |
32 | 4,5 | 14 | M10 | OK 14x5,5 | 3 | 12-25 | 10 |
40 | 5 | 14 | M10 | OK 14x5,5 | 3 | 15-25 | 10 |
50 | 7 | 19 | M12 | OK 17x5,5 | 3,5 | 30-40 | 10 |